LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 160 (3.0L - Cylinder Head, VALVETRAIN - Engine Code(S): CCBA (Cabriolet)) >> 15 Cylinder Head, VALVETRAIN >> Removal And Installation >> Left And Right Timing Chain Covers >> Removing

Left And Right Timing Chain Covers: Removing

WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, and 2010 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Engine Cover -1- And -2-
GWWA10-11070Courtesy of AUDI OF AMERICA, LLC
NOTE:

When installing, bring all cable ties back to same positions.

-- Remove the rear engine cover -2- upward.

-- Remove the affected secondary air injection combination valve. For the left one, refer to SECONDARY AIR INJECTION LEFT COMBINATION VALVE and for the right one, refer to SECONDARY AIR INJECTION RIGHT COMBINATION VALVE .

Left Timing Chain Cover 

Fig 2: Disconnecting Connector To Fuel Injectors (Left Cylinder Head)
GWWA24-10681Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1- and move the bracket together with the wiring harnesses to the side.

NOTE:

Ignore -2 and 3-.

-- Remove the bolts -1 to 8-.

Fig 3: Loosening/Tightening Bolts In Sequence For Left Timing Chain Cover
GWWA13-10254Courtesy of AUDI OF AMERICA, LLC

-- Carefully remove the left cover for the timing chain from the bond.

Right Timing Chain Cover 

Fig 4: Identifying Air Duct Pipe
GWWA24-10348Courtesy of AUDI OF AMERICA, LLC

-- Free up the fuel hose -1- and the EVAP canister hose -2- on the air duct pipe.

-- Remove the vacuum hose -3- from the air guide pipe connection.

-- Remove the air guide pipe by loosening the hose clamp -4- and opening the clips -arrows-.

-- Remove the bolts -3- and move the bracket together with the wiring harnesses to the side.

Fig 5: Disconnecting Connector To Fuel Injectors (Right Cylinder Head)
GWWA24-10682Courtesy of AUDI OF AMERICA, LLC
NOTE:

Ignore -1 and 2-.

-- Remove the bolts -1 to 8-.

Fig 6: Loosening/Tightening Bolts In Sequence For Right Timing Chain Cover
GWWA13-10255Courtesy of AUDI OF AMERICA, LLC

-- Carefully remove the right cover for the timing chain from the bond.