Compression, Checking: Assembling
WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, and 2010 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Assemble in reverse order of disassembling. Note the following:
-- Install the spark plugs. Refer to the the appropriate Service Information .
-- If the connectors were disconnected and the engine was started, then malfunctions have been stored in the Engine Control Module (ECM) Diagnostic Trouble Code (DTC) memory. Generate Readiness Code in Guided Functions using the vehicle diagnostic tester.