Cover With Oil Separator: Removing

WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, and 2010 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Intake Manifold Lower Section Bolt/Nut, Tightening Sequence

Courtesy of AUDI OF AMERICA, LLC

-- Remove the upper coolant pipe. Refer to UPPER COOLANT PIPE .

-- Remove the left lower section of the intake manifold. Refer to Removal and Installation .

-- Remove the bolts -arrows-.

Fig 2: Identifying Oil Separator Cover

Courtesy of AUDI OF AMERICA, LLC

-- Remove the high pressure lines and oil separator cover -1-.