LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 152 (3.0L - Cooling System - Engine Code(S): CCBA (Cabriolet)) >> 19 Cooling System >> Removal And Installation >> Engine Coolant Temperature Sensor -G62- >> Installing

Engine Coolant Temperature Sensor -G62-: Installing

WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, and 2010 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

Replace the O-ring.

To prevent coolant loss, install the ECT sensor immediately into the connection.

-- Check the coolant level, refer to CHECK THE COOLANT LEVEL .

scientia non olet · About LEMON Manuals