Display group "081"
WARNING: This page is about a different car, the 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Vehicle VIN transmitted by Instrument Cluster Control Module J285 and, depending on version of operating and display module, Climatronic Control Module J255, certain items of information from Instrument Cluster Control Module J285
| Display field |
Meaning |
Remarks |
| 1 |
- Operating and display unit, Climatronic Control Module J255 up to hardware/software version "0610"
|
|
| |
- Operating and display unit, Climatronic Control Module J255 as of hardware/software version "0711"
- VIN first transmitted on initial commissioning of operating and display module, Climatronic Control Module J255 or after last adaptation of operating and display module, Climatronic Control Module J255 by Instrument Cluster Control Module J285 and stored in operating and display module, Climatronic Control Module J255.
|
- Data are transmitted via the CAN-Bus comfort system
- New replacement operating and display modules, Climatronic Control Module J255 are supplied without VIN coding
- If the VIN displayed does not coincide with that transmitted by the Instrument Cluster Control Module J285, the fault "Control module incorrect Vehicle Identification Number (VIN)" is stored in the operating and display module, Climatronic Control Module J255.
- If an operating and display module, Climatronic Control Module J255 is installed in a different vehicle, the old VIN must be erased via the "Adaptation" function →
Climatronic Control Module J255, Adaptation (function 10)
|
| 2 to 4 |
Display fields not used with all versions of operating and display module, Climatronic Control Module J255
- Intended for information transmitted by Instrument Cluster Control Module J285 (such as assembly, serial and type approval number)
|
No significance for service work at present |