Table of codes transmitted by Instrument Cluster Control Module J285 and adapted during "Basic setting" function (codes "2")

WARNING: This page is about a different car, the 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Code			Meaning
0			No assignment Not displayed with all versions.
			Fillers, No assignment
		Code transmitted by Instrument Cluster Control Module J285
	0		Vehicle with no auxiliary heater Setting in adaptation channel "18" of Instrument Cluster Control Module J285 "Guided Fault-Finding" Vehicle Diagnosis, Testing Info. System VAS5051B or Vehicle Diagnosis Service Syst. VAS5052
	1		Vehicle with auxiliary heater Not available on US vehicles
			Fillers, No assignment
		0100	Vehicle with 4-cyl. engine
		0110	Vehicle with 6-cyl. engine
		1000	Vehicle with 8-cyl. engine

NOTE:

The heating of the coolant after a cold start calculated by the operating and display module, Climatronic Control Module J255 differs depending on engine version.