LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1499 (Heating & Air Conditioning (On Board Diagnostic)) >> 01 On Board Diagnostic (OBD) >> Read Measuring Value Block (function 08) >> Measuring value blocks from display group "011" through "020" >> Display group "019"

Display group "019"

WARNING: This page is about a different car, the 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Code transmitted by Comfort System Central Control Module J393 and Instrument Cluster Control Module J285 

Display field Meaning Remarks
1 Code transmitted by Comfort System Central Control Module J393 and Instrument Cluster Control Module J285 (code "1")
  • Display = "X.X XXX"
  • Remarks
  • Example: "0.0 000" = Vehicle for Germany with gasoline engine and Comfort System Central Control Module J393 for left-hand drive vehicle
  • Data are transmitted via the CAN-Bus comfort system
  • If the code differs from the information in the table, check coding of Comfort System Central Control Module J393 and Instrument Cluster Control Module J285 (as well as part number and index of these control modules) "Guided Fault-Finding" Vehicle Diagnosis, Testing Info. System VAS5051B or Vehicle Diagnosis Service Syst. VAS5052.
2 Code transmitted by Instrument Cluster Control Module J285 (code "2")
  • Display = " X. X XXXX"
  • Remarks
  • Example: "00 0100" = Vehicle with 4-cyl. engine
  • Data are transmitted via the CAN-Bus comfort system
  • If the code differs from the information in the table, check coding of Instrument Cluster Control Module J285, "Guided Fault-Finding" Vehicle Diagnosis, Testing Info. System VAS5051B or Vehicle Diagnosis Service Syst. VAS5052.
3 Display field not used  
4 Display field not used  
scientia non olet · About LEMON Manuals