LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1499 (Heating & Air Conditioning (On Board Diagnostic)) >> 01 On Board Diagnostic (OBD) >> Read Measuring Value Block (function 08) >> Measuring value blocks from "001" to "010" >> Display group "004"

Display group "004"

WARNING: This page is about a different car, the 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Right Temperature Flap Motor V159 

Display field Meaning Remarks
1 Actual feedback value of Right Temperature Flap Potentiometer/Actuator G221 (in Right Temperature Flap Motor V159)
  • Display value greater than "9" and less than "251"
  • Maximum permissible deviation "3" units from specified feedback value (only in range greater than "70" but less than "190")
2 Specified feedback value for Right Temperature Flap Potentiometer/Actuator G221 (calculated by operating and display module, Climatronic Control Module J255)
  • Display range "10 to 245"
3 Value determined during "Basic setting" and stored in the operating and display module, Climatronic Control Module J255 for the Right Temperature Flap Potentiometer/Actuator G221 with control motor set to "Cooling stop" (temperature flap routes air flow past heater core)
  • Display value greater than "9" and less than "71"
4 Value determined during "Basic setting" and stored in the operating and display module, Climatronic Control Module J255 for the Right Temperature Flap Potentiometer/Actuator G221 with control motor set to "Heating stop" (temperature flap routes air flow through heater core)
  • Display value greater than "189" and less than "246"
NOTE:
  • The notes on display group "003" also apply to this display group and should be observed if necessary.