Wiring and component check using Test Box V.A.G 1598A: Checking
WARNING: This page is about a different car, the 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- All fuses OK
- Adapter V.A.G 1598/11 and Adapter - 16 Terminals V.A.G 1598/12 connected to disconnected connectors of operating and display module, Climatronic Control Module J255
- On Diagnostic Operation System VAS 5051A, set "Measurement" mode.
Fig 2: Selecting Measurement Mode Required In Various Test Steps On Diagnostic Operation System VAS 5051A
- Select the measurement mode required in the various test steps on the Diagnostic Operation System VAS 5051A by touching the appropriate key on the display of the Diagnostic Operation System VAS 5051A.