LEMON Manuals
: Even more car manuals for everyone
Home
>>
Audi
>>
2016
>>
S5 Prestige, 2D Convertible
>>
Repair and Diagnosis
>>
External Pages
>>
Different car
>>
Section 149 (Controls, Housing - Manual Transmission Internal Components 0B2 AWD (Cabriolet))
>>
34 Controls, Housing
>>
Disassembly And Assembly
>>
Transmission Housing
>>
Installed Position: Locking Rings -A- For The Ball Bearings -B-
Installed Position: Locking Rings -A- For The Ball Bearings -B-
WARNING:
This page is about a different car, the 2010 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Installed Position: Locking Rings
Courtesy of AUDI OF AMERICA, LLC
The bevel -arrow- on the locking ring -A- faces away from the ball bearing -B-.
NOTE:
The locking rings and the ball bearings for the input and output shafts are identical.