Clutch Cover Tightening Specification And Sequence
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 Audi S5, 2014 Audi S5, 2013 Audi S5, 2012 Audi S5, and 2011 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
-- Tighten the bolts in three steps in the sequence shown:
| Step | Bolts | Tightening Specifications |
|---|---|---|
| 1. | -1 ••• 5- | Install by hand evenly until the bolt head contact the clutch cover. |
| 2. | -1 ••• 5- | Tighten one after the other in 90° steps until the clutch cover contact the transmission housing. |
| 3. | -1 ••• 5- | 8 Nm |