Removal And Installation: Flywheel: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 Audi S5, 2014 Audi S5, 2013 Audi S5, 2012 Audi S5, and 2011 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying T40176, Torque Converter -A-, And Nut -B-

Courtesy of AUDI OF AMERICA, LLC

Secure the transmission to the VAS 6095. Refer to SECURING ON ENGINE AND TRANSMISSION HOLDER .

-- Remove the left flange shaft. Refer to LEFT FLANGE SHAFT .

-- Attach the T40176 to the flywheel -A- with nut -B- -arrow-.

-- Rotate the T40176 upward.

Fig 2: Rotating T40176 Upward

Courtesy of AUDI OF AMERICA, LLC

NOTE:

To prevent the flywheel from tilting, counter hold it underneath as illustrated.

-- Remove the flywheel from the input shaft -arrow-. Do not tilt the flywheel when doing this.