LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 144 (Clutch - Manual Transmission Internal Components 0B2 AWD (Cabriolet)) >> Clutch >> Description And Operation >> Clutch Release Mechanism Assembly Overview >> Lubricating The Release Bearing

Lubricating The Release Bearing

WARNING: This page is about a different car, the 2010 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Lubricating Release Bearing
GWWA30-10221Courtesy of AUDI OF AMERICA, LLC
CAUTION:

Noises when actuating the clutch

  • Rattling noises can occur when pressing the clutch if there is not enough grease on the release bearings -arrows-
  • Lubricate the release bearings -arrows- with adhesive lubricating paste G 000 150.
  • Remove any grease still in the guide sleeve bearing area.
scientia non olet · About LEMON Manuals