Selector Lever Transmission Range Position Display Unit -Y26-: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 Audi S5, 2014 Audi S5, 2013 Audi S5, 2012 Audi S5, and 2011 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
-- Press the button on the electro-mechanical parking brake to activate it.
-- Move the selector lever into "S".
-- Carefully pry out the selector lever boot on the side using the 3409 -arrows- and fold it upward.
-- Release the spring -2- and remove the selector lever transmission range position display unit -Y26- -1- -arrow-.
Fig 2: Releasing Retaining Spring And Removing Selector Lever Transmission Range (TR) Position Display Y26 Upward
-- Disconnect the connector.