1. Replacing The Selector Mechanism Function Unit
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 Audi S5, 2014 Audi S5, 2013 Audi S5, 2012 Audi S5, and 2011 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
The following steps must be performed after completing this procedure:
-- Select Guided Functions , 02 - Transmission Electronics, Functions and 02 - Basic Setting (Repair Group 34) .
-- Select Calibrate Drive Position Sensor -G676 and then follow the instructions given on the vehicle diagnostic tester.