Securing On Engine And Transmission Holder: Procedure
WARNING: This page is about a different car, the 2014 Audi A5, 2013 Audi A5, 2012 Audi A5, and 2011 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
- Draining the ATF. Refer to ATF, DRAINING AND FILLING .
- Draining the gear oil. Refer to GEAR OIL .
-- Secure the :T40206 with :T40206/1 to the transmission as shown.
-- Attach the :T10358 to the lifting eye on the right side of the transmission using the M8 x 30 bolt -1-, the nut and two washers.
-- Connect the :VAS6100 and :T10358 with the :10-222A/2 .
-- Lift the transmission and place it into the :VAS6095A .