Transmission With A Short, Straight Oil Level Tube:

Courtesy of AUDI OF AMERICA, LLC

-- Pull the oil level tube -A- out of the ATF check hole using the :3438  and let the remaining ATF drain out.

• The O-ring -1- must fit correctly inside the groove in the oil level tube.

  Courtesy of AUDI OF AMERICA, LLC

-- Push the oil level tube -A- carefully and straight into the ATF check hole -B- by hand.

NOTE:

The O-ring on the oil level tube -A- seals the oil level height tube -C-. This is the only way the ATF level can be correctly adjusted.

Courtesy of AUDI OF AMERICA, LLCAUDI OF AMERICA, LLC Courtesy of AUDI OF AMERICA, LLCAUDI OF AMERICA, LLC

The oil level tube -A- must be replaced after the second flushing.

Ignore the :3438  .

-- Continue flushing the ATF. Refer to ATF FLUSH  - go to ATF, Flushing  .