Transmission With A Long, Bent Oil Level Tube:
WARNING: This page is about a different car, the 2014 Audi A5, 2013 Audi A5, 2012 Audi A5, and 2011 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
-- Pull the oil level tube -A- out of the ATF check hole using the :3438 and let the remaining ATF drain out.
-- Push the oil level tube -A- into the ATF check hole -B- by hand.
- Installation position: the large tab -1- on the ATF level tube must face the recess -2- on the ATF check hole.
NOTE:
The oil level tube -A- must be replaced after the second flushing.