Input Shaft Seal, Replacing: Notes

WARNING: This page is about a different car, the 2014 Audi A5, 2013 Audi A5, 2012 Audi A5, and 2011 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools And Workshop Equipment Required

Puller - Driveshaft Seal :T40014
Seal Installer - Driveshaft :T40167

The input shaft seal may be leaking if ATF is leaking from underneath the transmission bell housing.
The input shaft seal must be replaced if leaking.