Right Flange Shaft, Removing And Installing: Installing
WARNING: This page is about a different car, the 2014 Audi A5, 2013 Audi A5, 2012 Audi A5, and 2011 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal while noting the following:
-- Always replace the flange shaft circlip -A-.
-- Clamp the flange shaft in a vise with protective jaws. Use the new circlip -A- to press the previous circlip out of the flange shaft groove.
-- Check the right flange shaft seal -arrow- for damage and replace it if necessary. Refer to RIGHT SEAL, REPLACING .
-- Fill the space between the sealing/dust lip halfway with Sealing Grease :G 052 128 A1 .
-- Drive in the flange shaft using the : VW295 .
-- Fill and check the gear oil in front final drive. Refer to GEAR OIL, DRAINING AND FILLING .