Selector Lever Transmission Range Position Display Unit -Y26-, Removing And Installing: Removing

WARNING: This page is about a different car, the 2014 Audi A5, 2013 Audi A5, 2012 Audi A5, and 2011 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.

-- Move the selector lever into "N".

-- Unclip the frame -1- from the center console and remove it -arrows-.

Fig 1: Unclipping Mounting Frame For Selector Lever Boot From Center Console

Courtesy of AUDI OF AMERICA, LLC

-- Fold selector lever boot up.

-- Release the spring -2- and remove the Selector Lever Transmission Range Position Display Unit -Y26- -1- in direction of -arrow-.

Fig 2: Releasing Retaining Spring And Removing Selector Lever Transmission Range (TR) Position Display Y26 Upward

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector.