LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1307 (Controls, Housing [MULTITRONIC Transmission 0AW Fwd] (Cabriolet)) >> 37 Controls, Housing >> SUBFRAME Mount >> Transmission Support With Transmission Mount, Removing And Installing >> Removing

Transmission Support With Transmission Mount, Removing And Installing: Removing

WARNING: This page is about a different car, the 2014 Audi A5, 2013 Audi A5, 2012 Audi A5, and 2011 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the tunnel crossmember. Refer to TUNNEL CROSSMEMBER, REMOVING AND INSTALLING .

-- Remove the bolts -arrows- and the transmission support with the transmission mount from the transmission.

Fig 1: Identifying Transmission Support And Transmission Mount
GWWA37-10850Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1- and remove the lower stop -2- for the transmission mount.

Fig 2: Removing Bolts And Removing Lower Stop For Transmission Mount
GWWA37-10742Courtesy of AUDI OF AMERICA, LLC

-- Remove the nut -4- and remove the transmission mount -5- from the transmission support.