LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1307 (Controls, Housing [MULTITRONIC Transmission 0AW Fwd] (Cabriolet)) >> 37 Controls, Housing >> ATF Circuit >> Automatic Transmission Fluid Lines, Cleaning >> Procedure

Automatic Transmission Fluid Lines, Cleaning: Procedure

WARNING: This page is about a different car, the 2014 Audi A5, 2013 Audi A5, 2012 Audi A5, and 2011 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.

-- Always clean the ATF cooler and ATF pipes with compressed air (maximum 10 bar (145 psi)) before installing a replacement transmission.

-- Place the :SMN372500  under the transmission.

NOTE:

If extremely dirty ATF flows out when cleaning using compressed air, flush the ATF cooler and lines using clean ATF.

ATF pipes, removing and installing. Refer to ATF LINES, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals