LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1307 (Controls, Housing [MULTITRONIC Transmission 0AW Fwd] (Cabriolet)) >> 37 Controls, Housing >> ATF Circuit >> ATF Pipes, Removing And Installing >> ATF Lines, Removing And Installing, Vehicles With 2.0L TDI Engine Or 6-Cylinder Engine >> Removing

ATF Lines, Removing And Installing, Vehicles With 2.0L TDI Engine Or 6-Cylinder Engine: Removing

WARNING: This page is about a different car, the 2014 Audi A5, 2013 Audi A5, 2012 Audi A5, and 2011 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Clean working conditions for the automatic transmission. Refer to GUIDELINES FOR CLEAN WORKING CONDITIONS .

NOTE:

Place a clean cloth under the separating point to catch the escaping ATF.

Fig 1: Identifying Union Nut -Arrows-
GWWA37-11021Courtesy of AUDI OF AMERICA, LLC

-- Remove the union nuts -arrows - and the ATF lines.

-- Seal the open lines and connections with clean plugs from the Engine Bung Set:VAS6122  .

scientia non olet · About LEMON Manuals