LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1306 (Final Drive, Differential (MULTITRONIC Transmission 0AW Fwd) (Cabriolet)) >> 39 Final Drive, Differential >> Seals >> Input Shaft Seal, Replacing >> Procedure

Input Shaft Seal, Replacing: Procedure

WARNING: This page is about a different car, the 2014 Audi A5, 2013 Audi A5, 2012 Audi A5, and 2011 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

The Input Shaft Seal Can Only Be Replaced For Removed Transmissions.

-- Remove the transmission. Refer to TRANSMISSION, REMOVING AND INSTALLING .

-- Replace the input shaft seal. Refer to INPUT SHAFT SEAL, REPLACING .

-- Refer to ATF LEVEL, CHECKING after installing the transmission.

scientia non olet · About LEMON Manuals