Input Shaft Cover, Removing And Installing: Notes
WARNING: This page is about a different car, the 2014 Audi A5, 2013 Audi A5, 2012 Audi A5, and 2011 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Puller - Driveshaft Seal :T40014
- Pressure Stand :T40099
- Wishbone Rubber Mount Assembly Tool :T10219/1
- Press Plate :VW401
- Press Piece - 37mm :VW416B
- Ice spray
- Protective gloves
- Protective Eyewear
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview and parts information prior to starting procedure.
Mandatory Replacement Parts
- O-ring - Input shaft cover
- Circlip