Safety Precautions:
WARNING: This page is about a different car, the 2014 Audi A5, 2013 Audi A5, 2012 Audi A5, and 2011 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- The inner running and sealing surfaces -arrow A- of the press plate and pistons -arrow C- must not touch the shaft during removal and installation.
- The running and sealing surfaces must not show the smallest signs of damage such as scratches or grooves as a result of removing or installing.
- If damaged, the pressure plate of the piston must be replaced.
-- Carefully guide the pressure plate -1- with pistons -2- upward over the shaft -3-.
- The inner running surfaces of the press plate -1- and pistons -2- must not touch the shaft.