Input Shaft, Disassembling

WARNING: This page is about a different car, the 2014 Audi A5, 2013 Audi A5, 2012 Audi A5, and 2011 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.

Transmission removed.

NOTE:

Refer to REPAIR INFORMATION .

Refer to GUIDELINES FOR CLEAN WORKING CONDITIONS .

-- Remove the input shaft. Refer to INPUT SHAFT, REMOVING AND INSTALLING .

-- Remove the input shaft cover from the input shaft. Refer to INPUT SHAFT COVER, REMOVING AND INSTALLING .

-- Place the input shaft on the :T10219/1 .

Courtesy of AUDI OF AMERICA, LLC

-- Carefully raise the press plate with pistons with two screwdrivers -arrows-.