Operation 2: Erase DTC memory

WARNING: This page is about a different car, the 2006 Audi A4, 2005 Audi A4, 2004 Audi A4, 2003 Audi A4, and 2002 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Test conditions

Engine stopped, ignition switched on

Fig 1: Diagnostic System VAS 5051: Display

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Display on VAS5051:

Under -1- select diagnostic function "05 - Erase DTC memory".

NOTE: The readiness code is reset when the DTC memory is erased and must be reproduced.

Fig 2: Diagnostic System VAS 5051: Display

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Display on VAS5051:

1 - No display (before erasing)

DTC memory erased

NOTE:

Should the function be carried out?

Will be erased!

Press "OK"button in display -2-.
Press ← button.
Perform next operation.