Section 1297 (MULTIPORT Fuel Injection [CAEB,CPMA] (Cabriolet))
WARNING: This page is about a different car, the 2013 Audi A5, 2012 Audi A5, 2011 Audi A5, and 2010 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
- 24 MULTIPORT Fuel Injection
- General Information
- Description And Operation
- Air Filter Overview
- High Pressure Pump Overview
- Heated Oxygen Sensors Overview
- Fuel Injectors, Cleaning
- Throttle Valve Control Module -J338-, Cleaning
- Releasing Pressure In High Pressure Area
- Engine Code CAEB
- Component Locations Overview
- Notes
- Engine Control Module (ECM) -J623
- FP Control Module 1
- Accelerator Pedal Position Sensor And Accelerator Pedal Position Sensor 2
- Clutch Position Sensor 2
- After-Run Coolant Pump
- Oil Pressure Switch
- Oil Pressure Regulation Valve 3
- Ignition Coils
- Fuel Pressure Sensor 1
- IMRC Valve 2
- Intake Manifold Runner Position Sensor 1
- CMP Sensor 1
- Connectors
- High Pressure Pump
- Rpm Sensor 2
- Camshaft Adjustment Valve 1 Arrow
- Components
- ECT Sensor 1
- Charge Air Pressure Sensor 1
- Component And Connectors
- Oxygen Sensors
- Components On Turbocharger
- Observe Installed Location Of Turbocharger Recirculating Valve
- Intake Manifold Overview
- Fuel Rail Overview
- Component Locations Overview
- Engine Code CPMA
- Component Locations Overview
- Notes
- Engine Control Module (ECM)
- Fuel Pump (FP) Control Module 1
- Accelerator Pedal Position Sensor And Accelerator Pedal Position Sensor 2
- Clutch Position Sensor 2
- Oil Pressure Switch
- Oil Pressure Regulation Valve 3
- Ignition Coils And Adjusting Elements
- Fuel Pressure Sensor -G247- 1
- Intake Manifold Runner Control Valve -N316- 2
- Intake Manifold Runner Position Sensor -G336- 1
- Camshaft Position Sensor -G40- 1
- Connectors
- High Pressure Pump
- Low Fuel Pressure Sensor 1
- Rpm Sensor 2
- Camshaft Adjustment Valve 1 Arrow
- ECT Sensor 1
- Charge Air Pressure Sensor 1
- Cold Start Injector 1
- Component And Connectors
- Oxygen Sensors
- Components On Turbocharger
- Fuel Quality Sensor 1
- Intake Manifold Overview
- Fuel Rail Overview
- Component Locations Overview
- Specifications
- Diagnosis And Testing
- Removal And Installation
- Engine Cover
- Air Filter
- Air Filter Housing
- High Pressure Pump
- Fuel Injectors
- TEFLON® Combustion Chamber Seal
- Mass Airflow Sensor -G70-
- Fuel Pressure Sensor -G247-
- Throttle Valve Control Module -J338-
- Heated Oxygen Sensor -G39- And Oxygen Sensor Heater -Z19-
- Oxygen Sensor After Three Way Catalytic Converter -G130- And Heater For Oxygen Sensor 1 After Catalytic Converter -Z29-
- Engine Control Module -J623-
- Engine Code CAEB
- Engine Code CPMA
- Special Tools