LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1289 (Cylinder Head, VALVETRAIN [CGFA]) >> 15 Cylinder Head, VALVETRAIN >> Timing Chain Cover >> Overview - Timing Chain Cover >> Left Timing Chain Cover - Tightening Specification And Sequence

Left Timing Chain Cover - Tightening Specification And Sequence

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Left Timing Chain Cover Bolt Loosening Sequence
GWWA15-10921Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
NOTE:

Replace the bolts that were tightened with an additional turn.

The brackets -arrows A and B- are connected with the left timing chain cover.

-- Tighten the bolts in two steps in the sequence shown.

Step Bolts Tightening Specification/Additional Turn
1. -1 to 8- 5 Nm
2. -1 to 8- Turn an additional 90°.
scientia non olet · About LEMON Manuals