Overview - Crankcase Ventilation: Notes
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
- O-Ring
- Replace
- Oil Check Valve
- 20 Nm
- For oil supply to right cylinder head
- Seal
- Replace
- Cover with Oil Separator
- With connection for crankcase ventilation
- Removing and installing. Refer to OIL SEPARATOR, REMOVING AND INSTALLING .
- Bolt
- 9 Nm
- O-Ring
- Replace
- Connection
- For the crankcase ventilation
- Installed position. Refer to Figure
- O-Ring
- Replace
- Bolt
- 9 Nm
- Bolt
- 3 Nm
- Crankcase Ventilation Pipes
- To the cylinder head covers
- Removing and installing. Refer to CRANKCASE VENTILATION PIPES, REMOVING AND INSTALLING .
- O-Rings
- Replace
- Crankcase Ventilation Hose
- To the air guide pipe
- Hose Clamp
- Oil Check Valve
- 20 Nm
- For oil supply to left cylinder head
- O-Ring
- Replace