Clutch, Removing And Installing: Notes
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Counterhold - Flywheel:10-201
- Alignment Tool - Clutch Plate:T10442
- Torque Wrench 1331 5-50Nm:VAG1331
- Grease for Clutch Disc Shaft Splines:G 000 100
NOTE:
Replace clutch plates and pressure plates if the rivets are damaged or loose.
Allocate the pressure plate and the clutch plate according to the engine codes. Refer to the Parts Information.