Transmission Output Speed Sensor -G195-, REMOVING AND INSTALLING: Installing
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
-- Insert the Transmission Output Speed Sensor -G195- and tighten the bolt -arrow- to 10 Nm.
-- Install the valve body. Refer to VALVE BODY, REMOVING AND INSTALLING .