Oil Pan, Removing And Installing: Removing

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the noise insulation for the transmission.

-- Place the :VAG1306 underneath.

-- Remove ATF check plug -A-.

-- Remove the overflow pipe -C-.

Fig 1: Identifying Overflow Tube, Check Plug And Sealing Ring

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Drain the ATF.

-- Remove the bolts of oil pan -2- diagonally and remove the oil pan.

Fig 2: Identifying Oil Drain Plug & Oil Pan Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.