Oil Pan, Removing And Installing: Installing

-- Clean all magnets in oil pan recesses. Make sure the magnets touch the oil pan completely.

-- Install the ATF pan with a new gasket -1-.

Fig 1: Identifying New Gasket & Spacer Sleeves

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Make sure all spacer sleeves -2- are completely within the new sealing ring -1-.

-- Tighten the oil pan bolts diagonally and in several steps.

-- Install overflow tube -C-.

Fig 2: Identifying Overflow Tube, Check Plug And Sealing Ring

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install ATF check plug -A-.

-- Fill the ATF and check the level after installing. Refer to ATF LEVEL, CHECKING AND FILLING .