Oil Pressure Switch -F22-, Removing And Installing: Removing
WARNING: This page is about a different car, the 2012 Volkswagen Touareg and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview prior to starting procedure.
Mandatory Replacement Parts
- O-ring - Oil pressure switch
-- If the vehicle has air suspension, activate the vehicle lift mode. Refer to VEHICLE LIFT MODE .
-- Remove the front noise insulation. Refer to NOISE INSULATION .
-- Disconnect the connector -1-.
-- Remove the Oil Pressure Switch -F22- -item 2-.