Oil Pressure Regulation Valve -N428-, Removing And Installing: Removing

WARNING: This page is about a different car, the 2012 Volkswagen Touareg and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

-- If the vehicle has air suspension, activate the vehicle lift mode. Refer to VEHICLE LIFT MODE .

-- Remove the front noise insulation. Refer to NOISE INSULATION .

-- Disconnect the connector -1-.

Fig 1: Identifying Connector -1- And Bolt -2-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolt -2-, and remove the Oil Pressure Regulation Valve -N428-.