Test Sequence
WARNING: This page is about a different car, the 2012 Volkswagen Touareg and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
Marking field on the oil gauge tester:
-- Open the screw and move the adjusting ring so that the lower edge of ring matches the value on the upper scale -arrow- taken from the table.
-- Install the oil gauge tester all the way into the oil dipstick tube. Then pull it out and read the oil level again.
-- Read the value on the lower scale.
| Engine | Value on the Upper Adjusting Ring | Minimum Oil Level on the Lower Scale. | Maximum Oil Level on the Lower Scale. |
|---|---|---|---|
| 3.0L TDI | 11 | 0 | 16 |