LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1280 (Cylinder Head, VALVETRAIN [CATA]) >> 15 Cylinder Head, VALVETRAIN >> Cylinder Head >> Overview - Cylinder Head >> Loosening And Tightening The Central Bolt For The Toothed Belt Drive Gear

Loosening And Tightening The Central Bolt For The Toothed Belt Drive Gear

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Toothed Belt Drive Gear Bolt
GWWA13-10031Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Loosen and tighten the central bolt -1- with the Wrench - Pin Type:3036  .

Removing the Toothed Belt Drive Gear 

Fig 2: Identifying Toothed Belt Drive Gear, Removal
GWWA13-10327Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the toothed belt drive gear with the Puller - Toothed Belt Pulley:T10320  .

scientia non olet · About LEMON Manuals