16-Pin Harness Connector -D- In Wiring Diagram T16K
1 - LIN 1
2 - Connected terminal 30 for control motors (bridge to C1, D3, A5)
3 - Connected terminal 30 for control motors (bridge to C1, D3, A5)
4 - Control motor ground
5 - Control motor ground
6 - LIN 2 (LIN for vehicle electrical system, bridge to C4)
7 - Evaporator Temperature Sensor -G308-
8 - Right Front Upper Body Vent Temperature Sensor -G386- (bridge to C14)
9 - Left Front Upper Body Vent Temperature Sensor -G385- (bridge to C19)
10 - Right Footwell Vent Temperature Sensor -G262-
11 - Left Footwell Vent Temperature Sensor -G261-
12 - Not assigned
13 - Ground signal for Left Footwell Vent Temperature Sensor -G261-, Right Footwell Vent Temperature Sensor -G262- and Evaporator Temperature Sensor -G308-
14 - +5V Sunlight Photo Sensor -G107- (bridge to C9, C18)
15 - Not assigned
16 - Not assigned