RECIRCULATION Pump -V55-, Removing And Installing: Notes
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Torque Wrench 1331 5-50 Nm :VAG1331
- Hose Clamps - Up To 25 mm:3094
- Hose Clip Pliers:VAG1921
- Spring Clip Pliers:VAS6499
NOTE:
The Recirculation Pump -V55- is installed in the left front wheel housing behind the wheel housing liner.
The coolant system is under pressure when the engine is warm. If necessary, release the pressure prior to repair work.