LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1275 (Rear Suspension) >> 42 Rear Suspension >> Steel Spring Shock Absorber >> Rear Steel Spring Shock Absorber, Repairing >> Tightening Specification

Tightening Specification

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
Component Tightening Specification
Nut for steel spring shock absorber
  • Use new nut
 56 Nm 
Nuts for support bearing cover
  • Use new nuts
 26 Nm 
scientia non olet · About LEMON Manuals