SUBFRAME, Repairing, Bonded Rubber Mount In The Forward Direction Of Travel: Notes
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Engine and Gearbox Jack:VAS6931
- Puller - Kukko Counterstay:22/2
- Puller - Kukko Internal - 20-30 mm:21/4
- Puller - Kukko Separating Tool - Diameter 22-115 mm:15/2
- Hydraulic Press:VAS6178 with Bearing Installer - Wheel Hub/Bearing Kit- Adapter 13:T10205/13
- Tensioning Strap:T10038
- Pneumatic/Hydraulic Foot Pump:VAS6179
- Torque Wrench 1332 40-200 Nm :VAG1332
- Hydraulic Press - Subframe Bushing Tool Kit:T10301
-- Prior to replacing the defective bonded rubber mount, check the other bonded rubber mounts.
If tears or other damage is visible, they must also be replaced.