Enable Condition
WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
ENABLE CONDITION REFERENCE CHART
| Secondary Parameters | Enable Conditions |
|---|---|
| Engine coolant temperature | ≥ 75°C (167°F) |
| Battery voltage | ≥ 10.9 V |
| Atmospheric pressure | ≥ 75 kPa (563 mmHg, 22.2 inHg) |
| Fuel level | ≥ 9.6 l (2.54 US gal, 2.11 Imp gal) |
| Elapsed time after starting the engine | ≥ 10.49 s |
| Feedback of ISC | In operation |
| Lambda value (left and right) | ≥ 0.81 and <1.1 |
| After switching air conditioner to ON/OFF | ≥ 5.1 s |
| After intake manifold pressure changes by 4 | > 5.1 s |
| kPa (30 mmHg, 1.2 inHg) or more. | |
| Elapsed time after switching neutral position switch to ON/OFF | > 5.1 s |
| Vehicle speed | 0 km/h (0 MPH) |