Diagnostic Method
WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
- Abnormality Judgment 1
Judge as NG when the status where the number of camshaft position sensor signal in two crankshaft revolutions is less than 3 time(s).
JUDGMENT VALUE REFERENCE CHART
| Malfunction Criteria | Threshold Value |
|---|---|
| Amount of camshaft sensor signal during 2 revs of crankshaft. | < 3 time(s) |
Time Needed for Diagnosis: Engine two revolutions x 4 time(s)
Malfunction Indicator Light Illumination: Illuminates as soon as a malfunction occurs.
- Normality Judgment 1
Judge as OK and clear the NG when the malfunction criteria below are met.
JUDGMENT VALUE REFERENCE CHART
| Malfunction Criteria | Threshold Value |
|---|---|
| Camshaft position sensor signal | ≥ 3 time(s) |
Time Needed for Diagnosis: 2 engine revs.
- Abnormality Judgment 2
If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.
JUDGMENT VALUE REFERENCE CHART
| Malfunction Criteria | Threshold Value |
|---|---|
| Starter | ON |
| Camshaft position sensor signal | No input |
Time Needed for Diagnosis: 3000 ms
- Normality Judgment 2
Judge as OK and clear the NG if the continuous time while the following conditions are established is more than the predetermined time.
JUDGMENT VALUE REFERENCE CHART
| Malfunction Criteria | Threshold Value |
|---|---|
| Camshaft position sensor signal | Input exists |
Time Needed for Diagnosis: Less than 1 second