Enable Condition
WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
ENABLE CONDITION REFERENCE CHART
| Secondary Parameters | Enable Conditions |
|---|---|
| A/F main learning system | In operation |
| Engine coolant temperature | ≥ 70°C (158°F) |
| Engine load change | ≤ 0.02 g/rev (0 oz/rev) |
| Learning value of EVAP cone. | < 0.15 |
| Cumulative time of canister purge after engine start | ≥ 20s |
| Continuous period after canister purge starting | ≥ 29884 ms |
| Engine load | ≥ Value of Map 1 |
ENGINE COOLANT TEMPERATURE REFERENCE CHART
| Engine speed (rpm) | Idling | 700 | 1000 | 1500 | 2000 | 2500 | 3000 | 3500 | 4000 | 4500 |
| Measured value (g (oz)/rev) | na | 0.23 (0.01) | 0.19 (0.01) | 0.1825 (0.01) | 0.2 (0.01) | 0.2225 (0.01) | 0.23 (0.01) | 0.23 (0.01) | 0.26 (0.01) | 0.2625 (0.01) |