Enable Condition

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Rich → lean diagnosis response

ENABLE CONDITION REFERENCE CHART

Secondary Parameters	Enable Conditions
Battery voltage	≥ 10.9 V
A/F main feedback control condition	Complete
Deceleration fuel cut time of 5000 ms or more (intermediate)	Experienced
Deceleration fuel cut time of 5000 ms or more (wide)
After fuel cut	≥ 2000 ms (Intermediate)
	≥ 2000 ms (Wide)
Estimated temperature of the rear oxygen sensor element	≥ 500°C (932 °F) (Intermediate)
	≥ 500°C (932 °F) (Wide)
Number of deceleration fuel cut	≥ 1 time(s)

Lean → rich response diagnosis

ENABLE CONDITION REFERENCE CHART

Secondary Parameters	Enable Conditions
Battery voltage	≥ 10.9 V
A/F main feedback control condition	Complete
Deceleration fuel cut time is 6000 ms or more	Experienced
After fuel cut	≥ 2000 ms
Number of deceleration fuel cut	≥ 1 time(s)