Battery Fans --, Removing And Installing: Notes
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Torque Wrench 1331 5-50 Nm :VAG1331
NOTE:
The Battery Fan 1 -V457- and Battery Fan 2 -V458- are installed on the back of the Hybrid Battery Unit -AX1- behind a ventilation guide.
Be careful not to damage the foam seal on the ventilation guide when removing and installing the battery fan, and make sure it seals all the way around the mounting surface.
Read and follow the high voltage electrical system general warnings. Refer to HIGH VOLTAGE SYSTEM GENERAL WARNINGS .