Electric Drive Power And Control Electronics -JX1-, Replacing
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
If the Electric Drive Power and Control Electronics -JX1- is replaced, always complete the following adaptations in the order listed:
1 . Adapt the Electric Drive Power and Control Electronics -JX1- to the immobilizer using the Vehicle Diagnostic Tester.
2 . Code the Electric Drive Power and Control Electronics -JX1- using the Vehicle Diagnostic Tester.
3 . Calibrate the Electro-Drive Drive Motor -V141- using the Vehicle Diagnostic Tester.